Step 6B.8: Add the Transfer Tool Stationary 2D-Cam

<< Click to Display Table of Contents >>

Navigation:  Getting Started Tutorials - MechDesigner > Tutorial 6: Cams: Flat, Barrel, Globoidal, 'Slot' > 6B: Labelling Machine Cams > Add the 3 Stationary 2D Cams >

Step 6B.8: Add the Transfer Tool Stationary 2D-Cam

This Step Adds the Stationary 2D-Cam to Control the movement of the Transfer Tool.

QST5B-8-1

STEP 1: Start the Part-Editor to edit the Transfer Tool sketch.

Step 1 is complete

QST5B-8-2

STEP 2: Add a Circle

STEP 3: Dimension its location and diameter

Step 2 is complete

STEP 4: Close the Part-Editor

.

QST5B-8-3

STEP 5: Click Solids toolbar > Add Profile ( or Solids menu )

STEP 6: Click the Circle.

STEP 7: Click OK-tiny-11-15 in the Command-Manager

Step 7 is complete

QST5B-8-4

STEP 8: Click Machine-elements toolbar > Add 2D-Cam

STEP 9: Click the Base-Part

STEP 10: Click the Profile added to the Circle as the Cam-Follower

STEP 11: Click OK-tiny-11-15 in the Command-Manager

Step 11 is complete

The image to the left shows the new 2D-Cam that controls the movement of the Transfer Tool.