Step 7.5: Edit the Design-Set to satisfy Design-Objectives

<< Click to Display Table of Contents >>

Navigation:  Getting Started Tutorials - MechDesigner > Tutorial 7: Design-Sets >

Step 7.5: Edit the Design-Set to satisfy Design-Objectives

Edit the Design-Set

Design-Set-7-018

Edit the Design-Set

1.Double-Click the Design-Set in the Assembly-Tree or graphic-area - (or see How to open a Dialog-Box )

Note: Each time you open the Design-Set dialog-box, the Element-Rows may be in a different sequence.

In the Design-Set dialog-box,

2.Edit the Cam-X, Cam-Y, Roller-X, and Roller-Y dimension values

The Design Objectives are easily found.

Pressure Angle Maximum = +19Red-14-1

Pressure Angle Minimum = -19Red-14-2

Maximum Radius of Curvature = 78.5Red-14-3

Minimum Radius of Curvature = 53.5Red-14-4

I used these values.

Cam-X = 115  ; Cam-Y =  -23 , Roller-X =30  ; Roller-Y = 76