The Modified Trapezoidal motion-law has finite jerk throughout the segment. It has an average peak nominal acceleration compared to the other Traditional Motion-Laws.
This Motion-Law is a good general purpose type particularly in applications where the period ratio is above about 5. It is not good in applications where the input drive has backlash or is relatively flexible. As long as the drive satisfies these conditions, then this segment exhibits low residual vibrations.
Pressure Angle Considerations
This one of the Traditional Motion-Laws that produce a relatively large pressure angle - and so might need a large cam for a given lift and pre-prescribed maximum pressure angle.
This Motion-Law exhibits a rapid reversal of acceleration at the cross-over (mid) point. Only the Constant-Acceleration Motion-Law is more rapid, of the Traditional Segments. It is unsuitable to drive heavy masses at high speeds. The rapid reversal of torque may give rise to severe vibrations and shock loading especially if the period ratio is less than 10.