MechDesigner Reference & User Interface > How to... and FAQs > Mechanism Editor: How to... and FAQs > Troubleshooting > Profiles are not above the sketch-elements

Problem:

The position of the Profile and the Extrusion elements are not above the sketch-loops or Polylines.

Solutions:

Sketch-loops

1.Click the Home key on your keyboard, or do Run menu > Home - to move the Master Machine Angle to zero.

2.Open the Part with the sketch-loops in the Part-Editor, and then close the Part-Editor immediately.

3.Click Rebuild Now to rebuild the model.

Polylines

1.Click the Home key on your keyboard, or do Run menu > Home - to move the Master Machine Angle to zero.

2.Click the 2D-Cam or Gear-Pair that you want to move to the correct position.

3.Click Rebuild Now to rebuild the model.

To update a Polyline to the new shape of a 2D-Cam or Gear-Pair if it has changed:

4.Click MD-Solids menu > Polyline

5.Click the 2D-Cam or Gear-Pair