Machine Setting dialog-box

To Open :

Icon-MachineSettings

Edit toolbar > Machine-Settings icon

- or -

Edit menu > Machine Settings

Dialog :

Machine Setting dialog-box

Parameters in dialog: Simulation Speed, Number of Steps in Machine-Cycle, Engineering Units


Top-Tip : CYCLES / MIN = 0.0001 for stationary mechanism balancing, or for gravitational and/or spring loads only. Inertia, Centrifugal, and Coriolis loads are zero.

For example: Scissor Lifts, Guard Balancing, counter balancing.


Tutorials and Reference Help Files for MechDesigner and MotionDesigner 14.2 + © Machine, Cam, Mechanism, and Motion Design Software by PSMotion Ltd