How to exit (close) the Part-Editor
See also : How to Start the Part-Editor
When you close the Part-Editor, you return to the Mechanism-Editor.
To close the Part-Editor, do one of these methods.
|
1.Click the Geometry toolbar > Edit Part icon, at the left of the graphics-area. |
1.Double-click a Line, Circle, or Arc sketch-element that is in the Part open in the Part-Editor.  Note: If you double-click a...
|
1.Double-click the Y-axis. Note: We recommend the Y-axis because the X-axis is collinear with the CAD-Line.  |
1.Right-click the graphics-area The shortcut menu shows. 2.Click the Edit Part command to deselect it  |
1.Double-click the Part in the Assembly-Tree.  |